A Ready-Tooled White ABS Trim Profile for Visible Fixture Edges
This profile is built for the part of a fixture your customer actually sees. The 56 mm face covers a wide panel edge or joint in one piece. Behind it, the 31 mm depth leaves room for channels, wiring or a hidden fastening line. At 1.7 mm wall and 175 g per metre, it stays stiff without adding freight weight.
Because the die already exists, a standard order skips tooling and goes straight to sampling. If your design needs a deeper channel, a different leg or another colour, our die shop adjusts the section in-house. That way you deal with one supplier for tooling, resin and colour. Need a different colour on the same idea? See our colour extruded ABS profile range.
A good fit if you are sourcing:
- White edge trim or frame members for retail displays and shopfitting
- Joint covers that must match white cabinets or laminate
- A rigid plastic channel to hide LED strip or cabling behind a clean face
Technical Specifications of the White 56mm Extruded ABS Profile
| Parameter | Value |
| Material | ABS (acrylonitrile butadiene styrene) |
| Colour | White as standard; black, wood grain or RAL colours on request |
| Width × height | 56 mm × 31 mm |
| Wall thickness | 1.7 mm |
| Linear weight | 175 g/m |
| Process | Profile extrusion on an in-house die |
| Resin | Chimei or Tairilac ABS grades |
| Service temperature | −20 °C to 80 °C (standard ABS) |
| Length | Cut length set to your order |
Tolerances, cut length and resin grade are confirmed against your drawing before production starts.
Why Wholesale Buyers Choose This 56mm ABS Extrusion Profile
The same white on every reorder
White shows every batch difference. A faint yellow or grey cast is obvious when two lengths sit side by side on a display. Colour is fixed against your approved sample, so later shipments match the first one already installed in stores.
One part instead of two
The wide face and 31 mm depth let a single extrusion do the job of a flat strip plus a separate cover. That means fewer SKUs on your bill of materials and fewer pieces for your assembly team to handle.
Stiff, tough and light
ABS gives visible trim the impact toughness it needs in busy retail spaces, and the 1.7 mm wall holds its shape at only 175 g/m. Lighter metres mean more profile per carton and a lower landed cost on bulk orders.
Want to compare it with the trim you use today? Ask for a sample length and test the fit on your own fixture.
Colour-Stable ABS Resin and Finishing Options for White Plastic Profiles
Branded resin for steady dimensions
We run Chimei and Tairilac ABS grades. Consistent resin keeps melt flow even through the die, so the wall stays at 1.7 mm around each channel and the width holds from the first metre to the last.
Low shrinkage you can design around
ABS shrinks around 0.4 to 0.8%, much less than PP or PE. The allowance is built into the die, so parts arrive at drawing size and fit mating components without trimming on your line.
A surface that takes branding
ABS accepts printing, coating and plating. A logo, a contrast line or a metallic finish can be added to the face, and we test it on the real section when you request samples. For how we hold one shade across batches, read our guide to colour matching at the extrusion stage.
Matched to indoor use
Standard ABS suits −20 °C to 80 °C, which covers shop interiors, cabinets and equipment housings. For outdoor or high-heat locations, tell us the conditions and we will recommend a modified grade or another polymer before tooling.
Where Project Buyers Use a 56mm White ABS Profile in Retail and Shopfitting
The profile belongs to our display ABS profile range, where a clean edge matters as much as strength.
Retail display stands
Edge trim and frame members on gondolas, POP stands and shelving that are handled and wiped down every day.
Cabinet and furniture trim
Covers for panel joints and exposed board edges on light-toned casework, matching the laminate without a visible colour step. For curved corners, pair it with our 2800mm radius profile.
Light boxes and enclosures
Channels that hide LED strip or wiring behind the wide face, for signage frames, light boxes and equipment covers.
Custom ABS Profile Extrusion by Dachang for OEM Fixture Programs
If this section is close but not quite right, send a drawing or a physical sample. Our die shop has developed more than 5,000 custom sections, so changing a leg, a channel or the wall is routine work rather than a new project.
Options include colour (black, wood grain or RAL), two-material co-extrusion, surface finishing and cut length. For more on where ABS fits against wood and other materials, see why buyers choose ABS plastic profiles.
Drawing review. We check wall balance, channel depth and tolerances, and suggest changes before any steel is cut.
In-house die design and machining. No outside toolmaker, so die design and sampling can be done in around 72 hours for suitable sections.
Sample approval. You receive samples in your colour to sign off fit and appearance.
Production. The approved sample becomes the reference for every following batch.
Factory-Tested ABS Extrusions with Documented Quality and Compliance
ISO 9001 quality system
Production runs under ISO 9001, and each batch is checked against the approved sample for width, height, wall and colour before packing.
EU-ready paperwork
RoHS and REACH documentation is available on request, so the compliance file for EU-bound fixtures is ready before goods leave the factory.
Approved samples first
Every custom section is sampled and signed off before production, so fit and colour are settled before you commit to volume.
Bulk ABS Profile Packaging and Export Shipping from Dongguan
Lengths are bundled and packed to protect the visible face from scuffs in transit, and carton marking and packing method can follow your warehouse rules. We quote EXW Dongguan or FOB/FCA Shenzhen and ship to buyers in Europe, the Americas, Asia and Africa.
Wholesale MOQ, Sampling and Lead Times for Dachang ABS Profiles
| Item | Detail |
| MOQ | No fixed MOQ. Most orders start from about 300 kg, roughly 1,700 m of this profile. Smaller runs carry a set-up fee. |
| Samples | Sent for approval before production |
| Custom die | Around 72 hours for suitable sections |
| Production | Confirmed on each quotation by quantity and colour |
Why Sourcing Teams Work with Dachang as Their ABS Profile Manufacturer
Dachang is a dedicated ABS profile manufacturer and OEM extrusion supplier in Dongguan, Guangdong, producing custom plastic profiles since 1998. Learn more about our extrusion factory.
ESTABLISHED
1998
PLANT AREA
16,000 m²
CUSTOM SECTIONS
5,000+
DIE AND SAMPLING
About 72 h
QUALITY SYSTEM
ISO 9001
ABS RESIN
Chimei / Tairilac
Die design, machining and extrusion all happen in our own plant, so a drawing change never waits on an outside workshop. We also extrude PVC, PC, PMMA, PP, PE and TPE, which helps when one fixture project needs an ABS frame and a plastic diffuser for LED strip from the same source.
Buyer Questions About the White 56mm Extruded ABS Profile
Can this white ABS profile be produced in another colour?
Yes. Dachang, as an ABS extrusion manufacturer with in-house colour matching, can run the same 56 × 31 mm section in black, wood grain or a RAL colour you specify. A colour sample is sent for sign-off before the production run.
What is the minimum order for wholesale ABS profiles?
There is no fixed MOQ. Most orders start from about 300 kg, roughly 1,700 metres of this 175 g/m profile. Smaller trial runs are possible with a machine set-up fee.
Can the 56 × 31 mm section be modified to fit my part?
Yes. Dachang, as a custom ABS profile supplier with its own die shop, changes channel depth, wall thickness or legs from your drawing or sample. Die design and sampling take around 72 hours for suitable sections.
Which ABS resin is used for this plastic profile?
Production uses Chimei and Tairilac ABS grades, suited to service temperatures from −20 °C to 80 °C. For outdoor or high-heat use, ask about a modified grade.
Are RoHS and REACH documents available for EU projects?
Yes. Dachang, as a factory-direct extrusion supplier working under ISO 9001, provides RoHS and REACH documentation on request.
What shipping terms are offered for bulk ABS profile orders?
Orders are quoted EXW Dongguan or FOB/FCA Shenzhen, with packing and carton labels arranged to your receiving requirements.
Request a Quote from Dachang, Your Factory-Direct ABS Profile Supplier
Tell us what you need and our team replies with price, sample plan and lead time.
Quantity per order or per year
Colour (white, or a RAL code)
Cut length
Tolerance requirements
Drawing or photo for section changes
Destination port or delivery terms
Tangxia Town, Dongguan, Guangdong, China