Rigid Outdoor-Grade Plastic Angle Trim - Overview for Specifiers & Importers
This is a working corner finish, not a decorative strip. The equal-leg 25 mm × 25 mm geometry seats flush across both faces of a standard 90° external or internal corner, while the 2 mm wall lets the right-angle profile absorb knocks at the corner line instead of passing them to the panel edge beneath.
Extruded from external-grade rigid PVC, this white PVC corner trim holds the join where most projects switch materials - it finishes bathroom and kitchen panel returns, window reveals, signage board edges and refrigerated-vehicle interiors without rusting, swelling or needing paint. For an importer building a single stock line, a Dachang plastic angle trim in white 25 mm covers the most-specified corner dimension in panel and board work, so one SKU answers the widest slice of project demand.
90 Degree 25mm White Plastic Angle Trim - Full Specifications
The 90 degree 25mm white plastic angle trim is an equal-leg rigid PVC corner profile measuring 25 mm × 25 mm with a 2 mm wall and a true 90° angle, weighing 120 g per metre. Every Dachang white PVC angle trim run is extruded to this same section, so the spec below holds from first sample through repeat wholesale orders.
| Product | 90 Degree 25mm White Plastic Angle Trim |
|---|---|
| Material | Rigid PVC, external / outdoor grade (UPVC-type) |
| Profile angle | 90° equal-leg (L-shape) |
| Height | 25 mm |
| Width | 25 mm |
| Wall thickness | 2 mm |
| Weight | 120 g / metre |
| Standard colour | White (custom colours matched to RAL reference) |
| Surface | Smooth |
| Primary use | Corner protection, edge trimming & beading |
| Use environment | Indoor and outdoor |
| Trade terms | EXW / FOB / FCA |
Wholesale 90 Degree 25mm White Plastic Angle Trim - Key Advantages for Project Buyers
Three reasons sourcing teams standardise on the Dachang white angle trim for high-volume corner finishing:
True 90° equal-leg geometry
Both 25 mm legs meet at a square corner, so this right-angle corner trim is cut to length and bonded - no mitre jigs, no left/right handing on a packing list. Corner finishing collapses to one line item, and the offcut waste of angled corners disappears.
2 mm wall built for the impact line
A 2 mm wall makes this an impact-resistant PVC angle that holds the corner against trolley and foot-traffic knocks rather than cracking. At 120 g per metre it stays light, so a full pallet ships cheaply - the "too thin to protect, too heavy to freight" trade-off is engineered out.
White base, RAL-matched on demand
The standard finish is a clean, paint-free white that drops into most panel and board systems as supplied. Where a project calls for a colour, the same colour-matched angle trim is run to your RAL reference, so one supplier covers a building's full corner spec - no site painting.
Contract-Grade White PVC Angle Trim - Material & Extrusion Quality
The compound is external-grade rigid PVC - the UPVC-type material used for window and door profiles - chosen for the corner because it resists moisture, mould and the acids and alkalis common in kitchen, bathroom and industrial interiors. This uPVC angle does not rust like a metal corner, does not absorb water like a timber bead, and holds its white finish outdoors under UV.
The PVC is inherently flame-retardant, and Dachang can supply a lead-free, RoHS-compliant formulation for export markets. Each run is extruded on in-house tooling and gauged against the 25 × 25 × 2 mm section, so wall thickness and leg length stay even down the length and across re-orders - the dimensional repeatability a distributor needs when a customer re-orders a weatherproof PVC angle trim against last year's stock.
Project-Ready Plastic Angle Trim for Construction, Signage & Cold-Chain Projects
A single project-ready white angle trim from Dachang carries corners across four buyer segments:
Construction & fit-out
External and internal wall corner trim, window reveals and architrave, ceiling edges, door and window frames, and panel edges - specified for both indoor and outdoor positions on a single weatherproof profile.
Signage & display
Clean edge trim on sign boards and display panels, with corner protection on retail fixtures where a square, paint-free white edge reads as a finished detail.
Retail & store fit-out
Corner protection trim on shelving, counters and panel systems in high-traffic public space, where exposed corners take constant contact and need a hard-wearing corner guard.
Cold-chain & transport
Corner protection inside refrigerated trucks and cold rooms, where moisture and temperature swings rule out untreated metal or timber and call for a rustproof PVC corner trim.
Need pricing for your colour, section and volume?
Dachang returns a quote on the 90 degree 25mm white plastic angle trim within one business day - free samples available on request.
Custom 90 Degree 25mm White Plastic Angle Trim - OEM & ODM by Dachang
Send a drawing or a sample and Dachang cuts new tooling to it - a different leg length, a heavier wall, an unequal angle or a fully bespoke PVC angle profile. New tooling runs about 15 days; the factory produces a sample first and only starts the order once you have signed it off, so a custom corner trim never goes to mass production on assumption.
Colour is matched to your RAL reference, and packaging is built to your spec - cartons, cardboard, wooden cases or pallets, with your own label paper for private-label angle trim programmes. Standard wholesale runs ship on EXW, FOB or FCA terms.
Send your drawing for an OEM quote →
Factory-Tested PVC Angle Trim - Quality Control & Material Compliance
Quality control sits on the section and the material. Dachang gauges every run against the 25 mm × 25 mm × 2 mm profile so the legs stay square and the wall thickness stays even - the two faults that stop an angle sitting flush on a corner.
Material is checked for colour consistency batch-to-batch against the approved white or RAL sample, and a lead-free, RoHS-compliant, flame-retardant PVC angle trim can be supplied where a market or tender requires it. Because tooling is held in-house, the same die produces the same rigid PVC corner profile on a repeat order years later.
Bulk-Order Plastic Angle Trim - Packaging & Shipping
At 120 g per metre the profile is light to freight, so a container moves a high meterage for the cube. Lengths are bundled and boxed or palletised to travel without bowing, and packaging follows your requirement - cartons, cardboard, wooden cases, pallets and custom label paper. Dachang ships bulk angle trim orders on EXW, FOB or FCA terms from Dongguan, so you can route them through your own forwarder or ours.
90 Degree 25mm White Plastic Angle Trim - MOQ & Lead Times
Because the trim is extruded, minimum order quantity tracks the number of colours and the total meterage rather than a flat piece count - each colour needs its own extrusion set-up, so a single white run carries a lower minimum than a multi-colour order. Standard white 25 mm stock moves fastest; a custom-colour or bespoke section adds the tooling and sample stage.
New tooling takes around 15 days, a sample follows for sign-off, and production starts on your approval. Dachang confirms the exact MOQ, price and a firm lead time on the quote for your wholesale angle trim order.
90 Degree 25mm White Plastic Angle Trim Gallery
Dachang - Your Factory-Direct Plastic Angle Trim Manufacturer & Supplier
Dachang is a dedicated plastic angle trim manufacturer and OEM supplier, extruding rigid PVC profiles from its own factory in Dongguan, China since 1998.
As a factory-direct PVC angle trim supplier, Dachang controls tooling, extrusion and colour matching in-house - which is why a bespoke section, a RAL colour and a private-label pack come from one source on one lead time. You deal with the factory that makes the profile, not a trading desk reselling it, so pricing is mill-direct and re-orders hold their spec. Whether you need a single sample or a recurring wholesale 90 degree 25mm white plastic angle trim contract, Dachang is the corner trim manufacturer behind the order.
1998
In-house extrusion since
40+
Rigid building PVC profiles
RAL
Full colour matching
OEM
Tooling & private label
90 Degree 25mm White Plastic Angle Trim - Procurement FAQs
Q: What are the exact dimensions of the 90 degree 25mm white plastic angle trim?
A: It is an equal-leg L-profile with 25 mm × 25 mm legs, a 2 mm wall and a true 90° corner, in white rigid PVC, weighing 120 g per metre. Both legs are the same length, so it fits standard square external and internal corners.
Q: Can the white PVC angle trim be produced in custom colours and sizes?
A: Yes. The white finish is matched to any RAL reference, and custom leg lengths, wall thickness or a bespoke section are produced from new tooling. As a plastic angle trim manufacturer with in-house tooling, Dachang cuts the die from your drawing (about 15 days) and supplies a sample for approval before the run.
Q: Is the rigid PVC angle trim suitable for outdoor corners?
A: Yes. It is extruded from external-grade rigid PVC, so it is UV-, weather- and moisture-resistant and rated for both indoor and outdoor use - exterior reveals and eaves as well as interior wall and panel corners. It will not rust or rot in humid or chemical environments.
Q: What are the MOQ and lead time on a wholesale angle trim order?
A: MOQ tracks colour count and total meterage rather than a fixed piece count, because each colour needs its own extrusion set-up. New tooling for a custom section takes around 15 days plus sample approval. As a PVC angle trim supplier, Dachang confirms the exact MOQ, price and lead time on the quote against your colour, section and volume.
Q: Do you offer OEM production and private-label packaging?
A: Yes. As an OEM plastic angle trim manufacturer, Dachang produces to your drawing and packs to your spec - cartons, cardboard, wooden cases or pallets, with custom label paper for private-label programmes. Standard trade terms are EXW, FOB and FCA.
Q: How is the corner trim packed and shipped for bulk export?
A: Lengths are bundled and boxed or palletised so they travel without bowing, and the packaging format follows your requirement. At 120 g per metre the profile is light to freight, giving a high meterage per container. Bulk orders ship on EXW, FOB or FCA terms from Dongguan.